+39 0549/901202
PL-PRO VALKYRIE TORCH FOR 1500LUMEN OLIGHT PISTOL (OLG-120021)
OLIGHT TORCHES
€ 149,90 € 146,90
146 TITANO POINT
A modernized version of the Olight PL Valkyrie series torch equipped with a Cree XHP 35 HI Neutral White diode providing a 1500 lumen cone of light and a range of 280m. The flashlight is powered by a built-in lithium polymer battery.
PL-PRO Valkyrie is equipped with an adjustable mounting rail which can be adapted to most sidearms equipped with accessory rails compatible with the 22mm standard (Weaver / Picatinny / MIL-STD-1913). A system of steel clamps allows the quick attachment of the torch to a weapon.
The housing of the flashlight was made of aerospace aluminum covered with black hard anodizing. In addition, the head of the flashlight is protected by a steel crown at the front. Thanks to such construction, the manufacturer guarantees a resistance to a fall of up to 1 meter. The seals implemented guarantee IPX6 water resistance (a flow of water flowing from different directions with an efficiency of 100 liters per minute).
The heart of the flashlight is advanced electronics that drive the direct power drain from the XHP 35 HI diode. Thanks to this, the flashlight can project a light with the same power until the battery is completely discharged. The Active Thermal Management system protects the diode from overheating during operation in the most powerful mode (1500 lumens). After 90 seconds, it reduces the voltage and stabilizes the light to a level of around 600 lumens. After the flashlight is deactivated, cooled down and reactivated, the flashlight will work in the most powerful mode again.
The flashlight turns on via a convenient switch on the back.
The ambidextrous switch, allows you to use the flashlight for both left-handed and right-handed users.
Operating mode / operating time:
1500 - 600 lumens / 1.5 min + 45 min
300 lumens (90 minutes)
The set includes:
electric torch
USB charging cable
assembly key
PL-PRO Valkyrie is equipped with an adjustable mounting rail which can be adapted to most sidearms equipped with accessory rails compatible with the 22mm standard (Weaver / Picatinny / MIL-STD-1913). A system of steel clamps allows the quick attachment of the torch to a weapon.
The housing of the flashlight was made of aerospace aluminum covered with black hard anodizing. In addition, the head of the flashlight is protected by a steel crown at the front. Thanks to such construction, the manufacturer guarantees a resistance to a fall of up to 1 meter. The seals implemented guarantee IPX6 water resistance (a flow of water flowing from different directions with an efficiency of 100 liters per minute).
The heart of the flashlight is advanced electronics that drive the direct power drain from the XHP 35 HI diode. Thanks to this, the flashlight can project a light with the same power until the battery is completely discharged. The Active Thermal Management system protects the diode from overheating during operation in the most powerful mode (1500 lumens). After 90 seconds, it reduces the voltage and stabilizes the light to a level of around 600 lumens. After the flashlight is deactivated, cooled down and reactivated, the flashlight will work in the most powerful mode again.
The flashlight turns on via a convenient switch on the back.
The ambidextrous switch, allows you to use the flashlight for both left-handed and right-handed users.
Operating mode / operating time:
1500 - 600 lumens / 1.5 min + 45 min
300 lumens (90 minutes)
The set includes:
electric torch
USB charging cable
assembly key
No comments entered for:
Similar Products
