CLIP-ON LENS THUNDER 2.0 TQ35CR HIKMICRO (HM-TQ35CR.2)

Thanks to the extreme sensitivity of the thermal sensor and the power of the thermal imaging camera, Hikmicro 's line of Thunder 2.0 thermal viewers allows a precise distinction of the details with minimum temperature differences.
The clip-on is a tool specifically designed to exploit the characteristics of a classic optic and transform it into a thermal vision system, simply by applying it to the bell.

The thermal sensitivity below 20mK allows the best temperature distinction, while the high thermal resolution with a pixel interval of 12μm allows the perfect image display.
The TQ35CR model has a camera resolution of 640x512 and a detection distance of up to 1800m






The focus of the image is now adjustable in a fluid and simple way thanks to the wheel located on the top. The new magnesium-reinforced bodyshell allows for phenomenal strength while keeping the weight low.









The new battery allows for a longer life, is rechargeable and replaceable and can be recharged both inside the camera and with an external charger, supplied in the package. Furthermore, the thermal camera can also be powered by an external source connected via the USB-C port.






New intuitive graphical interface, with the most used functions selectable in a quick menu, in order to allow the user to customize the functions and make them available in the most immediate and simple way possible.
The ClipOn menu is central to being easily viewable on each lens






5 storage slots for calibration profiles, for quick recall of different preset calibrations.
The TQ35CR model has the possibility of using its own reticle if the one of the optics is unusable.









The Clip-On is quickly attachable and removable thanks to the quick coupling adapter (sold separately).
The M52*0.75 thread is common and is meant to be compatible with various third-party adapters as well.









Through the HIKMICRO Sight app it is possible to remotely control the viewer, share videos and images, and update the thermal imaging camera software without any difficulty.

Kickback trigger feature to automatically record seconds before and after a shot is fired.
Recoil resistance of 1000g/0.4ms, making it usable for most calibers


CHARACTERISTICS

Thermal module
Image Sensor: Uncooled Focal Plane Arrays
Maximum resolution: 640x512
Refresh rate: 50Hz
Pixel interval: 12μm
NETD (Thermal Sensitivity): <20mK
Lens: 35mm
Maximum detection distance: 1800m
Field of view (in degrees / at 100m distance): 12.52° x 10.03° / 21.94m x 17.55m
Minimum focus distance: 2m
Focal aperture: F1.0
Magnification: 1x (use the magnification of the optics)
Focus system: Top wheel

Image display
Display: 0.39 inch OLED - 1024x768 resolution
Brightness adjustment
Color modes: Black hot, White hot, Red hot, Fusion
FFC (digital correction): Automatic, manual, external correction
Pupil exit (diameter): 22mm
Eye distance: 10mm
Hue adjustment: Cold (cold), Warm (warm)

General
Waterproof level: IP67
Weight: 538g (without battery)
Dimensions: 18.6cm x 6.7cm x 6.8cm
Operating temperature: -30°C to 55°C

System
Video recording
Image recording
Hotspots
Standby mode
Memory: Internal 16GB EMMC
DPC (Defective pixel correction)
Hot track (identification of the hottest spot)
Distance measurement via height calculation (no rangefinder)
Audio Recording
Enabling the backlash recording
Maximum recoil: 1000g/0.4ms
Image calibration

Diet
Battery type: Rechargeable and removable Li-ion
Battery life: about 6.5 hours (with the hotspot off)
USB-C External Power Supply: 5V DC, 2A - Supports external power supply without battery inserted

ATTENTION: THE ADAPTER TO ATTACH THE DEVICE TO AN OPTIC IS SOLD SEPARATELY