+39 0549/901202
PINPOINTER PRO-FIND 35 MINELAB (3226-0003)
PIN POINTER
€ 134,90
134 TITANO POINT
The PRO-FIND pinpointer is an essential part of any finder's kit, locating with speed and precision in difficult conditions.
It accurately detects the target detected with the metal detector inside a small hole or slot where the plate of the metal detector cannot be inserted. This results in smaller excavations, less damage to the environment and faster recovery times.
Minelab PRO-FIND 35 is suitable for research on any type of terrain, on dry, wet sand and in water (up to 3 meters).
General features
Waterproof up to 3 meters. Waterproof and rugged design.
Audio and vibration detection. Audio tones and vibrations intensify as the probe approaches the target, making it easier to identify its exact location, especially when diving.
Ferrous Tone ID. Two different audio responses help identify ferrous waste from good non-ferrous targets. Excellent to use in combination with non-discriminating metal detectors.
Adjustable sensitivity. Five sensitivity levels allow you to adjust with maximum precision, depth and minimum disturbance in all ground conditions.
Easily adjustable with separate +/- buttons.
High visibility. The bright yellow handle makes it highly visible, so you don't forget it on the ground after digging.
Holster and lanyard included. The equipment includes a safety lanyard and a semi-rigid holster that attaches to any belt to have PRO-FIND 35 at hand.
Key technologies
DIF - The patented Minelab Detector Interference Free (DIF) technology considerably reduces interference between the metal detector in operation and the pinpointer turned off, deactivating the magnetic field of the pinpointer.
Target identification with Ferrous ID tone
Adjustable sensitivity: 5 levels
Waterproof up to 3 meters
Audio and Vibration Detection
Led light
Power supply: 1 x 9V
Autonomy: about 30 hours
Length 237 mm
Weight: 193 grams
Accessories supplied: belt holster and wrist safety strap
It accurately detects the target detected with the metal detector inside a small hole or slot where the plate of the metal detector cannot be inserted. This results in smaller excavations, less damage to the environment and faster recovery times.
Minelab PRO-FIND 35 is suitable for research on any type of terrain, on dry, wet sand and in water (up to 3 meters).
General features
Waterproof up to 3 meters. Waterproof and rugged design.
Audio and vibration detection. Audio tones and vibrations intensify as the probe approaches the target, making it easier to identify its exact location, especially when diving.
Ferrous Tone ID. Two different audio responses help identify ferrous waste from good non-ferrous targets. Excellent to use in combination with non-discriminating metal detectors.
Adjustable sensitivity. Five sensitivity levels allow you to adjust with maximum precision, depth and minimum disturbance in all ground conditions.
Easily adjustable with separate +/- buttons.
High visibility. The bright yellow handle makes it highly visible, so you don't forget it on the ground after digging.
Holster and lanyard included. The equipment includes a safety lanyard and a semi-rigid holster that attaches to any belt to have PRO-FIND 35 at hand.
Key technologies
DIF - The patented Minelab Detector Interference Free (DIF) technology considerably reduces interference between the metal detector in operation and the pinpointer turned off, deactivating the magnetic field of the pinpointer.
Target identification with Ferrous ID tone
Adjustable sensitivity: 5 levels
Waterproof up to 3 meters
Audio and Vibration Detection
Led light
Power supply: 1 x 9V
Autonomy: about 30 hours
Length 237 mm
Weight: 193 grams
Accessories supplied: belt holster and wrist safety strap
No comments entered for:
Similar Products
