SV-VFC SCAR-L / H CNC MAXX MODEL HOPUP GROUP (MX-HOP007SV)

CNC aluminum hopup chamber SV unit is specially designed to improve accuracy, durability and ensure constant air tightness for VFC SCAR-L / H AEG series.
The Hopup Chamber SV unit has a precision rotary dial design for fine hopup adjustments, it has also redesigned the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs firing straight and accurate on every single shot.
The Hopup Chamber SV unit is designed to accept nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H, and also fully compatible with most aftermarket soft and hard tires without losing FPS or dropping BBs.
The SV Hopup Chamber Housing features a new CNC Delrin locking C-Clip design to securely hold the barrel without wobbling and twisting. With the new extended design of sliding arms on both sides of the chamber housing, the hopup unit is always centered, straight and airtight at all times when closing receivers.

*** UV LED tracer and electronic module are optional add-ons to illuminate BBs in the dark. Operating voltage 7V DC to 15V DC (2-4 LiPo cells, 6-13 NiCad cells). (Sold separately)
*** Empty magazine detection sensor and electronic switch controller are optional add-ons to stop engine / HPA ignition when magazine is empty. (Sold separately)
*** Test results: FPS could be increased from 10FPS to 30FPS compared to stock setting. Please check your FPS!

1 x CNC aluminum hopup chamber SV unit
2 x Durable Clear Vinyl Cover Set
1 x CNC aluminum standard hop arm
1 CNC aluminum R-Hop arm
1 x standard silicone rubber damper
1 x R-Hop Nub silicone rubber shock absorber
1 x 4.5mm Length CNC Aluminum Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm Length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Stud
1 x CNC Delrin locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Oring Brass Spacer Holder
1 x steel compression spring

Total length: 48.35mm
Total height: 27 mm
Hub Outer Diameter (to fit gearbox): free size
Hub outer diameter (to fit the outer barrel): min 12 mm
Hub inside diameter (to fit the nozzle): max 8.3mm
Feeder outer diameter (to fit magazine): free size
Feeder length (to fit the magazine): free format
Material: 6061 aluminum

Machined from a solid block of aircraft grade aluminum with tight tolerances to provide improved accuracy, consistency and durability
Improved accuracy and constant air tightness for the VFC SCAR-L / H AEG series
Precision rotating dial design for fine hopup adjustments
Redesigned hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep BBs firing straight and accurate on every single shot
Removable brass threaded pin for installation and maintenance
Accepts nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H
Fully compatible with most aftermarket soft and hard tires without losing FPS or dropping BBs
Featuring a new CNC Delrin locking C-Clip design to securely hold the barrel without wobbling and twisting
Extended sliding arm design on both sides of the chamber housing to ensure the hopup unit is always centered, straight and airtight at all times when closing receivers
The UV LED tracer and the electronic module to illuminate the BBs in the dark are ready!
Empty magazine detection sensor to stop engine ignition / HPA is ready!