ECU LEVIATHAN V3 OPTICAL MOSFET JEFFTRON (JT-LEV-V3)

The Leviathan - V3 optical is one of the most advanced ETU (Electronic Trigger Unit) on the market
It has all the optical sensors for better handling and durability
Integrated wireless communication for quick setup using iOS or Android smartphones!
The foam on the trigger makes the trigger mode fantastic
Unique Real Feel Trigger System (RFTS),
the spring simulates the resistance of the trigger as in the real AK74. Adds secondary resistance with release after fire. RFTS was designed by a professional gunsmith for a more realistic feel when shooting
The outer entry door and exit pads are for custom accessories
Real-time response to change settings -> immediately test result
Easy installation in the gearbox in place of the original trigger contacts
Fully constructed wiring allows for quicker and easier installation into the gun. No soldering is required
The new functions are free for every user via online update

Optical sensors are used to detect the selector plate and sector gear
You can create a fantastic hair activation mode with the foams provided
Exclusive real feel trigger system (RFTS), the spring simulates the feel of the trigger as in the real gun. Adds secondary resistance with release after fire. The feeling is comparable to shooting with a real AK74

MAIN FUNCTIONS:
Adds new independent shooting modes for each position on the fire selector (SAFE - SEMI - AUTO)
Three adjustable bursts (range 2 - 20 shots)
Keep empty magazine detection like the original pistol
Rate of fire can be reduced to 40%. Adds pauses between hits to reduce RoF.
It provides a quick trigger response even with a very slow rate of fire, just like in a real pistol
Active braking with adjustable force (can be disabled)
Pre-cocking function for an instant shot with SEMI fire
Delay between shots adds time when firing is not possible, simulates shotgun reload or recoil delay (range 0.1 - 4.0 seconds)
Sensitivity of the electronic fuse set for high current detection to avoid damage if something goes wrong
Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
The virtual magazine simulates low capacity magazines, will force the gun to stop firing when it reaches 0.
You can set a warning after shooting before emptying the magazine and how it will be reloaded
There is an input port on the board for controlling external devices or Leviathan and output pad for powering the hop-up chamber BB lighting, powering electric charger, flashlight, etc.
The statistics screen shows the resume output with cycle times,
motor current consumption, rate of fire and temperatures. It allows you to fine-tune the gearbox update
The application shows the actual value of the battery voltage. The colored lines indicate the battery charge status, where green is OK, orange will warn after each shot and red will not allow you to shoot
User can save multiple settings in profiles
The update feature fixes bugs and adds new features to the device
There are three hit counters. Total count of each shot during the life of the device. The user counter can be reset by the user at any time. The ignition counter is reset by the battery connection
The error log shows that errors made during the life of the device can be cleared by the user
For added security the wireless connection can be disabled via the switch (can be disabled)
Leviathan monitors current, voltage and temperature to avoid damage when something goes wrong.
The motor vibrates and beeps as feedback to the user
The programmed settings are saved in the Leviathan's memory immediately after their modification,
so that you can test it immediately and the settings are not lost when the battery is disconnected or the connection with the smartphone is lost
The new functions are free for every user via the online update function

FIRE MODES:
Independent for each position on the fire selector (SAFE - SEMI - AUTO)
SAFE: no response to trigger pull.

Semi: Fires one shot for each trigger pull.
Semi / BurstX: Short trigger fires single shot, long trigger fires in burst.
Binary trigger: fires a single shot when the trigger is pulled and another single shot when released.
BurstX: burst of shots for each pull of the trigger.
BurstX + BurstY: the short pull of the trigger fires burstX,
prolonged pressure of the trigger fires burstX + burstY.
BurstX / Full: Short trigger pull fires burstX, long trigger pull fires automatically.
Full: The gun fires automatically until the trigger is released.
Virtual Reload: Pull the trigger to reload the virtual charger


EXTERNAL ENTRANCE:
Works with the input terminal
OFF: Any signal at the input terminal is ignored.
External trigger: the gun trigger is disabled and replaced by a microswitch connected to the input (SIG and GND)
Trigger Burst-3: the microswitch connected to the Input (SIG and GND) triggers 3 bursts when pressed. The gun trigger is still functional.
Trigger AUG: Selector plate detection is disabled. The gun trigger is set on the selector to semi.
The microswitch connected to the (SIG, GND) input is set to auto selector.
Magazine empty (NO): the microswitch activates the detection of the magazine empty, when connected SIG with GND.
Magazine empty (NC): the microswitch activates the detection of the magazine empty, when SIG with GND is disconnected.
Virtual charging: the micro switch activates the charging of the virtual charger,
when SIG is connected with GND.

ENGINE PADS:
The output pads are for hop-up chamber BB lighting, electric charger power supply, flashlight, etc.
These pads cannot be controlled from the smartphone app. The power supply will only work when the engine is running.


Compatibility:
AK47, AK74, Galil, Bizon with V3 gearbox according to TM design
Tokyo Marui AK47 Next Generation
G36, XM8 with V3 gearbox according to TM design
Tokyo Marui G36 Next Generation
ASG CZ 805 BREN
AUG, UAR with V3 gearbox according to TM design
Fal / SA58 with V3 gearbox according to TM design
MP5K,
UMP with V3 gearbox according to TM design
SIG 55X with V3 gearbox according to TM design
S&T VSS or VAL