CONTROL UNIT LEVIATHAN V2 TOP VERSION BLUETOOTH & DOUBLE TRIGGER JEFFTRON (JT-LEV-V2)

LEVIATHAN V.2 BACK control unit.
TOP VERSION Bluetooth & Double Trigger.

Product description: Leviathan - V2 in stock.
Leviathan - V2 is a processor controlled mosfet with Bluetooth communication. Adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, stats ...
Everything is controlled via the application in the smartphone (iOS and Android).
The device is fully integrated into version 2 of the gearbox instead of the original trigger contacts.
Comes with fully stocked wires with 30A mini fuse and DeanT connector - no soldering needed.

MAIN FUNCTIONS:
Adds new independent shooting modes for each position on the focus selector (SAFE - SEMI - AUTO)
Three adjustable bursts (range 2 - 20 shots)
Rate of fire pauses between shots to reduce RoF. It provides fast firing response even with a very low rate of fire, just like in a real pistol
Active braking with adjustable force (can be deactivated)
Pre-cocking function for instant shot at SEMI fire
Delay between shots adds time when you can't shoot, simulates delay from gun reload or recoil (range 0.1 - 4.0 seconds)
Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
User can save multiple settings under profiles
The update function fixes bugs and adds new features to the device
The application shows the actual value of the battery voltage. The colored lines indicate the battery charge status
There are three hit counters. Total count each shot over the life of the device. The user counter can be reset by the user at any time. The ignition counter is reset by connecting the battery
The error log shows errors made during the life of the device
Leviathan - V2 monitors current, voltage and temperature to avoid damage when something goes wrong.
The motor vibrates and beeps as feedback to the user
The programmed settings are saved in the Leviathan - V2 memory immediately after their modification, so the settings are not lost when Bluetooth or battery are disconnected

SHOOTING MODES:
Independent for each position on the fire selector (SAFE - SEMI - AUTO)
SAFE: no response on the trigger.
Semi: fires single shot for trigger.
Semi / BurstX: Short trigger shot fires single shot, long trigger shot shots.
Double trigger: fires a single shot when the trigger is pulled and another single shot when released.
BurstX: firing in bursts for triggered.
BurstX / BurstY: short trigger pull fires burstX, long trigger trigger pops burstX + burstY.
BurstX / Full: short trigger pull fires burstX, long trigger pull fires automatically.
Full: The pistol fires automatically until the trigger is released.

TECHNICAL SPECIFICATIONS:
Easy installation inside version 2 gearbox, compatible with Tokyo Marui standard
In most cases, no modifications are needed in the pistol or Leviathan - V2
Uses a microswitch operated by the sector gear for perfect semi and firing times
The included CNC trigger has a screw to move its zero position. Thanks to it, the shot can be carried out with a very short trigger, it is called "trigger the hair"
Thanks to advanced electronics, the Leviathan - V2 can be used with any common gearbox upgrade and gun rate of fire
The fully made wiring allows for quicker and easier installation in the gun, it is long enough for all types of guns with battery inserted in the butt. No soldering is required
There are high quality 1.5 qmm (AWG16) power supply wires with thin and rigid MPPE insulation and 0.34 qmm (AWG24) blue signal wire with MPPE insulation
The outer diameter of the power wires is only 2.06mm and the blue wire 1.24mm
The length of the cable between the gearbox and the battery connector is 290mm
The electronics are coated with paint, protect the Leviathan - V2 from water
For the correct pre-cocking function it is necessary to have a non-return closure in the locking device
Specification for common batteries up to 17 V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8 V)
The device increases the rate of fire of the gun and the battery stays longer, compared to basic cables
With active braking ON the piston is not partially tensioned, the spring is fully released, the parts in the mechabox are not under strain and the nozzle blocks the hop-up chamber for the most part (depends on the ROF)
In weapons with a very high rate of fire (ROF), the active brake resolves multiple shots in semi mode
The braking effect is the most powerful with a high torque motor
Remove from the gearbox: toggle, trigger, trigger contacts and trigger lock, you won't need them with the Leviathan - V2

MOBILE APPLICATION: you can install it here
INSTRUCTIONS FOR THE DEVICE: here you can download the installation manual in English [PDF, 4.33 MB]
PACKAGING:
Leviathan - V2 drop-in module with stock wiring, DeanT connector, 30A mini fuse and faston connectors to the motor
Black CNC trigger with zero path adjustment screw
Screw with washer for fastener into gearbox
Foam to hold the device in place
Installation manual in English

SAFETY WARNING:
Installing this device in the gearbox requires advanced technical skills!
Please read this information before installing the device to avoid damage.
Short circuit or incorrectly connected battery will cause immediate damage to the device that is not covered by the warranty.
It can cause a fire or even an explosion of the battery.
Disconnect the battery when not using the gun!
Otherwise it will completely discharge the battery.
Because the device continuously discharges small amounts of current from the bathroom.
Do not connect the battery when the gun is pointing at you, another person or an animal.
Do not modify, repair and put into any type of liquid or thermal shock the Leviathan - V2.
OTHER INFORMATION: https://www.jefftron.net/leviathan/leviathan-v2