RIFLE SA-A27P ONE BLACK SPECNA ARMS (SPE-01-024707)

Specna Arms SA-A27 carbine replica is made largely from a uniform alloy of zinc and aluminum, reinforced with steel elements at the most vulnerable points of the replica (steel elements - all screws, pins and tactical swivels harness). Both the stock SF containing the battery and the pistol grip were made of polymer. The replica receiver and the RIS handguard have undergone the anodizing process, which guarantees a high degree of protection against corrosion. The paint was applied via a powder coating process, after subjecting the surface to the sandblasting process prior to applying the paint. This provides much higher abrasion resistance of the applied paint than normal.

The parts of the replica are very well aligned - in a way that so far may only be noticed in replicas from top-tier manufacturers such as G&P or Classic Army, the replica is also perfectly balanced. This allows for near-ideal handling of the replica and its weight is barely noticeable once the replica has been placed on the shoulder.

The replica is equipped with a quick spring change system, the so-called Enter & Convert ™. Thanks to this system, it is possible to quickly and quickly adapt the power of the replica to the conditions expected on the playing field without the need to access a workshop or a set of special tools - once the change of the body of the replica is extracted, the process spring change takes literally seconds.

The benefits of the Enter & Convert ™ system are hard to overestimate. In light of the current trend across Europe to use legal limitations on the initial speed of replies or internal regulations within various groups, the system guarantees the User a varied set of possibilities and a lot of freedom. The Enter & Convert ™ system allows you to replace the main spring in a minimum time, so as to customize the speed of the muzzle towards the playing area in such a way as to guarantee an ideal compromise between the effectiveness of the fire and safety for the User himself and other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to the base initial speed of ~ 410 FPS provided by the manufacturer's default mainspring, the replica is perfect for operating on a mid-range. The set also includes an M90 spring, which allows you to reduce the initial speed to ~ 310 FPS and, consequently, to adapt the replica for short-range and indoor operations.

A cylinder-level reinforced gearbox contains a steel spring guide which is an element of the Enter & Convert ™ system and mounted on 8mm ball bearings and steel gears. The system is protected by four anti-reverse latches. A lightweight piston made from polycarbonate polymer features a steel tooth to increase durability. There is a type 2 cylinder and the steel crusher. Replica is factory equipped with an accurate rotary type polymer Hop-Up unit that allows for very precise and stable adjustment of BB overclocking.

The updated version features a number of new reinforced parts such as:
reinforced steel gear set
steel spring guide
light polymer piston
aluminum airtight piston head
metal head
airtight metal nozzle

The replica features a 22mm top RIS rail, MLOK handguard and SF stock. The upper RIS rail features flip-up iron sights, which can be detached freely to make room for attaching a chosen optoelectronic aiming device. Thanks to the extendable stock with a non-slip pad, it is possible to adapt the length of the replica to the body type and preferences of the user. A standard hider is based on a 14mm left hand thread, which allows a silencer to be fixed in place.

In order to enhance the realism of the game, the replica also features a snap closure mechanism.
The replica comes with a 300 BB steel Hi-Cap magazine.

The set does not include a battery or charger.

The set includes:
replica
charger
additional main spring